Cerma Ceramic C•S•L Firearm Foam and Grease Treatment

Sale price Price $59.95 Regular price $85.00 Unit price  per 


  Cerma STM-3® CSL Firearm Foam and Grease - sold as a package or individually.

Cerma utilizes SiC technology to form a micro-ceramic seal on all metal parts to reduce friction, remove carbon, copper, and lead deposits, and clean old oil from firearms, loaders, and loading tools.  Cerma leaves behind a SiC finish that treats the metal to create a matrix that is impervious to heat, cold, and buildup, with 6x the load-carrying capacity of US Military required specifications.

Cerma CSL Firearm Foam will reduce friction, wear, and abrasion while providing unmatched protection.  Just clean firearm as normal, Cerma is all the protection you will ever need. Cerma CSL Firearm Foam is not your ordinary gun cleaner, Cerma CSL is a new generation of lubrication and protectant fortified with STM-3 technology.

Cerma CSL Firearm Grease is engineered to meet the most demanding needs for firearm lubrication and protection. Prevents metal damage in actions, shotgun hinges and hardware, frame rails, and bolt-action locking lugs. Quick and easy to apply. Will cling to metal and will not wash off with water.  Works in extreme temperatures -60°F to 350°F.

•   Increased Velocity and Better Grouping  
•   Cleans, Seals, Protects, and Lubricates  
•   Helps Remove Carbon, Copper & Lead Deposits  
•   Reduced Jams, Increased Performance  
•   Superior Corrosion Protection / Prevents Rust and Oxidation
•   Extends Barrel Life •  Extreme Temperatures (Hot and Cold)  
•   Smoother Action   •  Lower Barrel Temps, typically 25°F to 100°F 
•   Easier and Faster Cleaning (Less Buildup)  
•   Reduced Maintenance Costs  
•   Water-Resistant, won't Break Down or Dry Out  
•   Restores Surface Metal Imperfections  
•   Extended Shooting Time Between Cleanings  
•   Safe on all Metals, won’t Etch or Pit Barrels  
•   Powerful & Fast-Acting • Non-Flammable,  Non-Corrosive 
•   Stays in place and lubricates in the most severe conditions 
•   Excellent Water and Chemical Washout Resistance
•   Easy to Use  
•   Odorless After Application  
•   American Innovation & American Made

Cerma CSL products are environmentally safe and do not contain any solvents or PTFEs.

Norwalk CT Police Department Usage Review of Cerma CSL Firearm:
I must admit that I tend to view products with skepticism however the proof was in the data.  I saw a legitimate 200 fps gain in a 16” AR-15 that would be the equivalent of having a 20” barrel, as well as a legitimate 150 fps boost in a 40 cal Sig P-229R. Now when cleaning time came around, both guns pretty much wiped clean with minimal fuss.  I am looking forward to continued use of Cerma and can see that it also has potential for USPSA shooters who have to meet a minimum power floor providing extra velocity without pressure increase.

Corey Vento- Police training officer 
Norwalk CT Police Department
203 xxx-xxxx
Instructions - Cerma CSL Firearm Foam:

Cerma Technology works by utilizing three parts:
Carbon (dirt), Water, and Heat.  For best performance, follow the instructions so that all three elements are properly utilized and the Cerma process completes itself.

Part 1 - Carbon / Dirt:  Do not Pre-Clean firearm prior to application of Cerma, for AT LEAST 48 hours prior.
Do NOT use any other cleaner while you are using Cerma CSL
as your firearm cleaning protocol.

Part 2 - First Time Cleaning
2) Insert Straw into Spray Tip of Aerosol Can
3) Point Straw into Barrel of Firearm and Spray
4) When Foam Starts to Come Out of Action Area, STOP Spraying
5) Let Cerma Sit for 20 Minutes without Wiping or Cleaning
7) After 20 Minutes, Swab out the Foam with Clean Dry Swab
8) Using Another Swab Saturated with Room Temp Water, 
Swab Barrel Again - this is the “Water” Element
9) As soon as Possible, Take Firearm Out and Fire Until 
The barrel is Warm to Hot - this is the “Heat” Element
Note:  DO NOT Use Any Other Cleaner while using Cerma CSL.

Part 3 - Follow Up Cleanings
1) Repeat Steps 1 to 4 Above
2) Let Cerma Sit for 5 Minutes without Wiping or Cleaning
3) After 5 Minutes, Swab out the Foam with Clean Dry Swab
NO need to Swab again with Wet Swab, 
NO need to take the Firearm out and Immediately Fire. 
Note:  DO NOT Use Any Other Cleaner while using Cerma CSL.

Instructions - Cerma CSL Firearm Grease:

Take off the tip and inject sparingly into the firing and action area of the firearm. No need to wipe off unless you have over-applied.